Debonaras
view · edit · print · history

Allnet 6500 is a variant of Thecus N2100

 ALL6500:~# uname -a
 Linux ALL6500 2.6.9-n2100 #2 Thu Mar 30 15:23:15 CST 2006 armv5tel unknown
 ALL6500:~# cat /proc/meminfo
 MemTotal:       256880 kB
 MemFree:        172896 kB
 Buffers:         40348 kB
 Cached:          24672 kB
 SwapCached:          0 kB
 Active:          18524 kB
 Inactive:        54600 kB
 HighTotal:           0 kB
 HighFree:            0 kB
 LowTotal:       256880 kB
 LowFree:        172896 kB
 SwapTotal:           0 kB
 SwapFree:            0 kB
 Dirty:               0 kB
 Writeback:           0 kB
 Mapped:          15008 kB
 Slab:             7096 kB
 Committed_AS:    30324 kB
 PageTables:        508 kB
 VmallocTotal:   385024 kB
 VmallocUsed:     19168 kB
 VmallocChunk:  3907584 kB
 ALL6500:~# ls
 ls      lsmod
 ALL6500:~# cat /proc/interrupts
   0:          0   IOP321 DMA 0 EOT
   1:          0   IOP321 DMA 0 E0C
   2:          0   IOP321 DMA 1 EOT
   3:          0   IOP321 DMA 1 E0C
   9:      65116   IOP321 Timer Tick
  11:       9557   IOP321 i2c biu adapter 0
  16:         90   XScale CCNT
  20:          0   IOP321 DMA 0 ERR
  21:          0   IOP321 DMA 1 ERR
  27:       2964   eth0, uhci_hcd
  28:          0   uhci_hcd
  29:          3   libata, ehci_hcd
  30:         44   eth1
 Err:          0
 ALL6500:~# dmesg
 Linux version 2.6.9-n2100 (root@dev_222) (gcc version 3.3.2) #2 Thu Mar 30 15:23:15 CST 2006
 CPU: XScale-IOP8032x Family [69052e30] revision 0 (ARMv5TE)
 CPU: D undefined 5 cache
 CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
 CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
 Machine: Intel IQ31244
 Memory policy: ECC disabled, Data cache writeback
 On node 0 totalpages: 65536
   DMA zone: 65536 pages, LIFO batch:16
   Normal zone: 0 pages, LIFO batch:1
   HighMem zone: 0 pages, LIFO batch:1
 Built 1 zonelists
 Kernel command line: console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M mem=256M@0xa0000000
 Relocating machine vectors to 0xffff0000
 PID hash table entries: 2048 (order: 11, 32768 bytes)
 Console: colour dummy device 80x30
 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
 Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
 Memory: 256MB = 256MB total
 Memory: 213760KB available (2149K code, 596K data, 76K init)
 Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
 Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
 CPU: Testing write buffer coherency: ok
 Freeing initrd memory: 43008K
 NET: Registered protocol family 16
 PCI: bus0: Fast back to back transfers disabled
 SCSI subsystem initialized
 Enable CCNT succ
 Intel IOP3XX DMA Copyright(c) 2004 Intel Corporation
 NetWinder Floating Point Emulator V0.97 (double precision)
 Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
 NTFS driver 2.1.20 [Flags: R/W DEBUG].
 JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
 Initializing Cryptographic API
 RAMDISK driver initialized: 16 RAM disks of 40960K size 1024 blocksize
 loop: loaded (max 8 devices)
 Thecus : Init thecus event proc entry .
 ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
 ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
 Using anticipatory io scheduler
 mice: PS/2 mouse device common for all mice
 md: linear personality registered as nr 1
 md: raid0 personality registered as nr 2
 md: raid1 personality registered as nr 3
 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
 NET: Registered protocol family 2
 IP: routing cache hash table of 2048 buckets, 16Kbytes
 TCP: Hash tables configured (established 16384 bind 32768)
 ip_conntrack version 2.1 (2048 buckets, 16384 max) - 308 bytes per conntrack
 ip_tables: (C) 2000-2002 Netfilter core team
 NET: Registered protocol family 1
 NET: Registered protocol family 17
 NET: Registered protocol family 5
 md: Autodetecting RAID arrays.
 md: autorun ...
 md: ... autorun DONE.
 RAMDISK: Compressed image found at block 0
 VFS: Mounted root (ext2 filesystem).
 Freeing init memory: 76K
 Warning: unable to open an initial console.
 cloop: Initializing cloop v2.01
 cloop: loaded (max 8 devices)
 cloop: losetup_file: 129 blocks, 65536 bytes/block, largest block is 62049 bytes.
 cloop: losetup_file: 65 blocks, 65536 bytes/block, largest block is 19920 bytes.
 cloop: losetup_file: 407 blocks, 65536 bytes/block, largest block is 59486 bytes.
 CFI: cfi_probe_chip qry_present failed
 IOP3xx Flash: Found 1 x16 devices at 0x0 in 16-bit bank
  Intel/Sharp Extended Query Table at 0x0031
 cfi_cmdset_0001: Erase suspend on write enabled
 0: offset=0x0,size=0x20000,blocks=128
 Using buffer write method
 6 RedBoot partitions found on MTD device IOP3xx Flash
 Creating 6 MTD partitions on "IOP3xx Flash":
 0x00000000-0x00040000 : "RedBoot"
 0x00040000-0x00d40000 : "ramdisk"
 0x00d40000-0x00ea0000 : "kernel"
 0x00ea0000-0x00fc0000 : "user"
 0x00fc0000-0x00fe0000 : "RedBoot config"
 0x00fe0000-0x01000000 : "FIS directory"
 RTL8169s/8110s: PCI device 0000:00:01.0: unknown chip version, assuming RTL-8169
 eth0: Identified chip type is 'RTL8169'.
 eth0: RTL8169s/8110s Gigabit Ethernet driver 2.2 at 0xfe000000, 00:50:8d:30:ff:b2, IRQ 27
 eth0: Auto-negotiation Enabled.
 eth0: 100Mbps Full-duplex operation.
 RTL8169s/8110s: PCI device 0000:00:02.0: unknown chip version, assuming RTL-8169
 eth1: Identified chip type is 'RTL8169'.
 eth1: RTL8169s/8110s Gigabit Ethernet driver 2.2 at 0xfe000400, 00:50:8d:30:ff:b3, IRQ 30
 eth1: Auto-negotiation Enabled.
 Probing F75373
 Allocating memory for F75373
 client=c0554600 client.id=61442 Attaching F75373
 Data[0]=0x19
 F75373 Vendor ID=19F75373 Try count 1 ,Probe result=0
 F75373 Time 1 rtc_rs372_probe try success !!
 Read F75375 register 0xF0 value = 0x80
 Set F75375 register 0xF0 value to 0x02
 Read F75375 register 0xF0 value = 0x82
 Probing rs372
 rtc_rs372_probe Try count 1 ,Probe result=0
 rtc_rs372_probe Time 1 rtc_rs372_probe try success !!
 Probing pca9532
 Probe result=0
 libata version 1.11 loaded.
 sata_sil version 0.9
 SFISCFG0: 0x10401554
 SFISCFG1: 0x10401554
 ata1: SATA max UDMA/100 cmd 0xD09EE080 ctl 0xD09EE08A bmdma 0xD09EE000 irq 29
 ata2: SATA max UDMA/100 cmd 0xD09EE0C0 ctl 0xD09EE0CA bmdma 0xD09EE008 irq 29
 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:007f
 ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
 ata1: dev 0 configured for UDMA/100
 scsi0 : sata_sil
 ata2: no device found (phy stat 00000000)
 scsi1 : sata_sil
   Vendor: ATA       Model: ST3160812AS       Rev: 3.AA
   Type:   Direct-Access                      ANSI SCSI revision: 05
 Thecus Tray: 1, sda
 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
 SCSI device sda: drive cache: write back
  sda: unknown partition table
 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0, devfs scsi/host0/bus0/target0/lun0
 criticalevent_user: disk_add sda
 port=0x02,val=0x31
 port=0x04,val=0x97
 Write reg 0=80
 Write reg 0=1
 Set F75375 register 0xF0 value to 0x02
 1 VAL1=50
 1 VAL1=50
 1 VAL1(0x60)=50
 2 VAL1=50
 2 VAL1=50
 2 VAL1(0x60)=50
 Write reg A0=32
 Write reg B0=32
 Write reg A1=30
 Write reg B1=30
 Write reg A2=19
 Write reg B2=19
 Write reg A3=F
 Write reg B3=F
 eth0: changed MAC to 00:14:FD:10:37:CC
 RTL8169s/8110s: eth0: link up
 eth1: changed MAC to 00:14:FD:10:37:CD
 RTL8169s/8110s: eth1: link off
 Clear Critical Queue.
 usbcore: registered new driver usbfs
 usbcore: registered new driver hub
 ehci_hcd 0000:00:04.2: EHCI Host Controller
 ehci_hcd 0000:00:04.2: irq 29, pci mem 0x800a0400
 ehci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
 ehci_hcd 0000:00:04.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 4 ports detected
 USB Universal Host Controller Interface driver v2.2
 uhci_hcd 0000:00:04.0: UHCI Host Controller
 uhci_hcd 0000:00:04.0: irq 28, io base 0xfe000800
 uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 2 ports detected
 uhci_hcd 0000:00:04.1: UHCI Host Controller
 uhci_hcd 0000:00:04.1: irq 27, io base 0xfe000820
 uhci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3
 hub 3-0:1.0: USB hub found
 hub 3-0:1.0: 2 ports detected
 Initializing USB Mass Storage driver...
 usbcore: registered new driver usb-storage
 USB Mass Storage support registered.
 usbcore: registered new driver usblp
 drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver

  _____     ____    _    ____
 |__  /   _|  _ \  / \  / ___|
   / / | | | | | |/ _ \ \___   / /| |_| | |_| / ___ \ ___) |
 /____\__, |____/_/   \_\____/
      |___/
 zd1211 - version 2.0.0.0
 usbcore: registered new driver zd1211